Household Appliance Bearings

Low noise ball bearing is the most popular selection of bearing for 3-phase standard electric motors and commercial electric motors for domestic appliances because of its simple and maintenance free arrangement.

Although load at shaft end is rarely known to motor manufacturers, operational load in most cases are widely believed to be lower than the permissible load of the selected bearing. Hence, JHB design put more emphasis to grease service life than fatigue life of electric motor bearings.

Grease

• Service life of an electric motor bearing can be understood as the grease service life as fatigue is seldom the root cause of failure .
• In order to ensure that proper bearing function is sustained by the initial grease quantity in the bearing, extra attention has been paid to the selection of grease type, cleanliness, appropriate quantity & installation conditions .
• Chevron SRI # 2 grease is the standard grease of JHB premium grade ball bearing because of its proven performance in wide temperature range (-30 / + 150 ℃ ), water resistance and quiet running .
• More is not always better. Grease quantity of JHB premium grade ball bearing is about 25% on the free internal space of a bearing

Enclosure

• Although both shield and seal-type ball bearings are widely used by motor manufacturers, it is advisable to use full enclosure type of sealed-bearings for motor maintenance and repair purposes because of its higher effectiveness in retaining grease while excluding contaminant
• Light contact triple lip seals are duly designed for premium grade ball bearings to tackle the combination of factors, namely low torque and good enclosure. Seal has to give due respect to low friction torque, which is the main factor accounting for the efficiency of domestic appliance electric motors. On the other hand, it has to be tight enough to eliminate grease contamination & leakage .
• The light contact triple lip seals in blue color are made of Hydrogenated N itrile R ubber material with the operation temperature from -40 ℃ to + 150 ℃ .

Our Practices

• Quiet running is achieved not only by dimensional accuracy ABEC 3, but also by a good combination of high precision steel ball, filtered grease, clearance and cleanliness of raceway .
• Premium grade ball bearings are 100% noise tested after greasing to ensure that the grease is free of contaminants that to cause premature wear .
• Tight tolerance of inner bore for better compatibility to shafts and better resultant clearance maintained after assembly .
• Internal modifications and design of JHB bearings are fully tested and homologated by test rigs for reliable performance .

JHB cares

• JHB premium ball bearings are in compliance with RoHS directives .
• Non-toxic ink and recycle paper is used for our packaging materials .

Ex-stock availability

Regular stocks of premium grade ball bearings are kept to satisfy the customers' requirements of immediate delivery & small quantities.

The most popular items in stock including:

608-2RDQE6		608-ZZQE6
6000-2RDQE6 ~ 6010-2RDQE6		6000-ZZQE6 ~ 6010-ZZQE6
6200-2RDQE6 ~ 6210-2RDQE6		6200-ZZQE6 ~ 6210-ZZQE6
6300-2RDQE6 ~ 6310-2RDQE6		6300-ZZQE6 ~ 6310-ZZQE6